Sony KDS-R70XBR2 Projection Television User Manual


 
Other Information
68
7 Put the new lamp into its place.
Make sure the lamp is securely mounted into the compartment. Failure to
do so may cause a fire or the screen to go dark.
8 Reattach the lamp door.
To secure the door, turn the knob to the right while pushing the door in,
until the marks on the lid and the case line up. Then, turn the screw
clockwise to tighten the door.
Do not touch the inside of the lamp compartment.
The lamp is very hot immediately after use. Never touch the glass
portion of the lamp or the surrounding parts.
After the used lamp has cooled, place it into the empty box of the
replacement lamp. Never put the used lamp into a plastic bag.
The lamp compartment is tilted, as shown in the following
illustration.
If the lamp is not securely reattached, the self-diagnostic function
may be triggered and the POWER LED blinks three times (see
page 37).