Filter
Top Products
Setup
17
1 Prepare remote control for use
Inserting the batteries
As shown in the illustration, open the battery cover lid of the remote control and insert two IEC R6
(size AA) batteries (supplied).
Using the remote control
To use the remote control, point it towards the remote control sensor on the Network Media
Receiver.
z Hints
• If the operation range of the remote control decreases, replace both batteries with fresh ones.
• After replacing the batteries, the TV manufacturer code (page 28) must be set again.
Verify e/E polarity and insert
the batteries from the E side.
Remote control sensor