Filter
Top Products
Setup
29
Case 3: Network connector of computer is free (system environments
E
,
F
)
Note
When connecting the Network Media Receiver and computer as shown above, the following settings must
be made.
• Assign a fixed IP address to the computer (page 33).
• Select the IP address allocation method of the Network Media Receiver (page 37).
Assigning a fixed IP address to the computer
When the Network Media Receiver is connected via network cable in one of the system
environments listed below, a fixed IP address must be assigned to the computer as follows.
• E, F (page 20)
• G (page 20) without router with built-in hub
Note
Do not make this setting if the system environment includes a router (or a router with built-in hub).
1 On the computer, access the “Start” menu and click “My Computer” to
bring up the “My Computer” screen.
2 Click “More” and “My Network Places”.
The “My Network Places” screen appears.
3 Click “Show Network Connections”.
The “Network Connections” screen appears.
4 Right-click “Local Area Connection” and click “Properties”.
The “Local Area Connection Properties” screen appears.
Network cable
(supplied)
To NETWORK
connector
Computer
To NETWORK
connector
Network Media Receiver
Crossover
cable (supplied)
Connection adapter
(supplied)