Filter
Top Products
42
• Computer is turned off
c Turn the computer on.
• Network is not ready
c Check whether all cables are plugged properly into the network connectors. If a hub or router is
used, also check whether the hub or router is powered.
z Hints
• If a computer is not shown on the ??? “Server List” ??? screen, press the OPTIONS button to bring up
the Options menu, select ??? “Refresh” ???, and press the SELECT button. Some time may be required
for the computer to appear on the list. If the computer does not appear also after selecting ??? “Refresh”
???, the IP address may not have been assigned properly to the Network Media Receiver. If necessary,
change the IP address allocation setting of the Network Media Receiver to match the system
environment (page 00).
• To call up the ??? “Server List” ??? screen from another screen, press the TOP button on the remote
control to bring up the Content List screen, and then press the RETURN button on the remote control.
To select a server
Use the V/v buttons to select the server with the desired content and then press the SELECT
button.
A list of all content items on this server that can be played via the Network Media Receiver appears
(??? “Content List” ??? screen).
For information on functions available when this screen is shown, see “Selecting content” (page
00).
To refresh the server list
If a server on the network has been turned on after the Network Media Receiver, the ??? “Server
List” ??? screen will not show this server as available for connection. In such a case, update the ???
“Server List” ??? screen as follows.
1 Press the OPTIONS button on the remote control.
The Options menu appears.
2 Use the V/v buttons to select ??? “Refresh” ???, and press the
SELECT button.
The ??? “Server List” ??? screen is updated and now shows the latest information.