Filter
Top Products
Operation
41
To turn power off
1 Press the Network Media Receiver POWER button to turn the Network
Media Receiver off.
The standby indicator changes from green to red, and the screen display is turned
off.
Note
The Network Media Receiver consumes a certain amount of power also while it is in the standby
mode. To fully cut the power, disconnect the power cord from the AC outlet.
2 Press the TV POWER button to turn the TV set off.
3 Turn power to the computer off.
1 On the computer, access the “Start” menu and click “Turn off computer”.
2 Click “Turn off”.
Selecting a server
Among the servers on the network, select the one that has the content you want to play.
??? “Server List” ??? screen
Icon Meaning Current status of computer
Computer has previously been connected to
Network Media Receiver
Computer has previously been connected to
Network Media Receiver
* Even if the status is shown as unknown, you can click the SELECT button and select ??? “Connect” ???
from the submenu. This may result in the connection being established. If the connection is not
established after a while, the following reasons are possible.
• Computer is in standby or hibernation mode
c Start the computer. If the ??? “Start computer automatically” ??? setting (page 45) is selected, the
computer will automatically start up from the standby or hibernation mode when the connection
is established.
Available for connection
Status unknown *
The names of computers
that can be connected are
displayed.