Filter
Top Products
20
2 Connect Network Media Receiver to TV
Note
If this step is carried out while the Network Media Receiver is connected to the power supply, operation
errors may occur. Make sure that the power cord is not plugged into an AC outlet when connecting the
Network Media Receiver to the TV.
Use the supplied audio/video cable to connect the Network Media Receiver to the TV.
The plugs of the audio/video cable are color-coded. Insert each plug into the connector of the same
color.
When using an S-Video cable (not supplied), do not connect the video plug (yellow) of the audio/
video cable.
1
Note
Do not place the Network Media Receiver on top of the TV. Also avoid other high locations, where the
unit could be dislodged by the cables, causing it to fall.
To video input
Audio/video cable
(supplied)
To S VIDEO
OUT connector
l : Signal flow
S-Video cable
(not supplied)
To AUDIO/
VIDEO OUT
connectors