Filter
Top Products
Setup
23
3 Connect Network Media Receiver to
computer via network cable
When using a wireless connection between the Network Media Receiver and the computer, this step
is not required. Proceed to step 4 “Connect power” (page 00).
Note
If this step is carried out while the Network Media Receiver is connected to the power supply, operation
errors may occur. Make sure that the power cord is not plugged into an AC outlet when connecting the
Network Media Receiver to the network.
Network cable connection
To connect the Network Media Receiver to the computer, the network port of the computer must be
free, or a hub with at least one free port must be available.
The connection will differ, depending on your system environment.
Also refer to the separate Quick Connection Guide.