Filter
Top Products
Operating the Equipment Locally
Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 4-69
ST.TM.E10076.3
Bit-rate Option
To access the Bit-rate option, press the Bit-rate softkey in the
Data B - RS422 Menu. This enables the bit-rate of the RS-422
synchronous data channel to be set.
Table 4.70: Bit-rate Options
Selected Option Description
Settings cycle from 56 to 1792 in steps of 56 then from 64 to
2048 in steps of 64, then back to 56
RS-422 synchronous data
channel bit-rate.
RS422 PID Option
The RS422 PID option is selected from the Data B - RS422 Menu by
pressing the RS422 PID softkey. The option is used for entering or
updating data PIDs. Enter a PID using the softkeys, then press the Enter
softkey to accept it
To be DVB compliant, PIDs below 32 are reserved. Therefore PIDs 32 to
8191 are available for use. In the event of a clash, one of the PIDs will be
changed by the Encoder’s internal checking algorithm.
Test Mode Option
The Test Mode option is selected from the Data B - RS422 Menu by
pressing the Test Mode softkey. The option is used for turning the test
mode On and Off.
Delay Option
The Delay option is selected from the Data A - RS232 Menu by pressing
the Delay softkey. The option cannot be changed.
D Mode Option
The D Mode option is selected from the Data A - RS232 Menu by pressing
the D Mode softkey. The option cannot be changed.
SNMP oid index Option
The SNMP oid
9
index option is selected from the Data B - RS422 Menu by
pressing the SNMP oid index softkey. See SNMP oid index Option on
page 4-68 for details of this option.
Version Option
This option indicates the version of the data. It is for status only and
cannot be changed.
9
oid = object identifier.