Filter
Top Products
Options and Upgrades
Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 3-3
ST.TM.E10076.3
3.1 What’s Available
3.1.1 Option Functions
The basic Encoder functionality can be enhanced with the inclusion of
options, hardware and software.
Each hardware option module consists of a horizontally mounted PCB with
rear panel connector space (except the M2/EDCOM2/BISS which has no
external connectors and does not occupy an option slot). At reset, the
software of the Encoder detects which modules are fitted and configures
them as necessary. The modules can be fitted into the positions indicated
in Table 3.1.
When the appropriate software option has been purchased it is enabled in
the Encoder, which resets and displays the appropriate menu items. See
Table 3.2 for the software options.
Table 3.1: Hardware Option Module Positions
Marketing Code Name Assembly
Part No
Card
Part No
Slot No.
in 1U
Slot No.
in 2U
Max No. of
Cards in 2U
Daughter Card Options
M2/EDCOM2/BISS BISS
1
scrambling
option - Mode 0, 1
and BISS-E only -
with secure key
entry
S12284 S11484 — —
Hardware Options
M2/EOM2/AUDLIN Additional Audio +
Linear PCM
S12293 S11976 2 1, 4, 5 3
M2/EOM2/DAT Data Card - for
additional Data
S12369 S12368 2 1, 4, 5 3
M2/EOM2/REMUX
(
supported by
Encoder software
version 2.2 and later)
Remux Option
Module
S12449 S10655 2 1 1
M2/EOM2/XLR XLR Expander
Card
S12556 S12557 Not available 1 and 4
(uses double
slot)
1
M2/EOM2/DEC SD Decoder Card S11753 S11385 - 6 1
M2/EOM2/QPSK
DEMOD
QPSK Demod Card S11852 - - 5 1
M2/EOM2/SAT
DEMOD
16QAM Demod
Card
S12640 - - 5 1
M2/EOM2/IP IP Output Card S12794 S12822 1 3, 5, 6 1
NOTE…
Empty option slots must be fitted with a blanking plate.
1
BISS is implemented according to Tech 3290 March 2000 and BISS-E is implemented according to Tech 3292 April
2001. BISS-E is available from Build version 2.2.0 and later.