TANDBERG E5740 Flat Panel Television User Manual


 
Technical Specification
Page B-24 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder
ST.TM.E10076.3
B.10.5 M2/EOM2/DEC, SD Decoder Card Option
NOTE…
The M2/EOM2/DEC, SD Decoder Card Option is supported by Encoder software version 3.1 and later.
Table B.37: ASI Output (SD Decoder)
Item Specification
Safety Status: SELV
Connector Type: BNC Female
Connector Designation: ASI Out (Located on the adjacent demod option card)
Output Impedance: 75 W
Data Coding: 8B/10B
Channel Rate: 270 Mbit/s
Specification: DVB A1010 rev 1 (Byte mode only)
Table B.38: Composite Video Output (SD Decoder)
Item Specification
Safety Status: SELV
Connector Type: BNC Female
Connector Designation: Composite
Output Impedance: 75 W
Video Standards: PAL–N, -B, -G, or –I, or NTSC–M with or without pedestal
Composite Video Level: 1V pk-pk in 75 W nominal
Table B.39: Digital Video Output (SD Decoder)
Item Specification
Safety Status: SELV
Connector Type: BNC Female
Connector Designation: SDI
Output Impedance: 75 W
Video Standards: ITU-R BT.656 digital output at 270 MHz
Composite Video Level: 800mV ± 10 mV pk-pk in 75 W nominal