Filter
Top Products
Technical Specification
Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page B-23
ST.TM.E10076.3
B.10.4 M2/EOM2/XLR, XLR Expander Card Option
NOTE…
The M2/EOM2/XLR, XLR Expander Card Option is supported by Encoder software version 3.0 and
later.
Table B.36: Analogue and Digital Audio (XLR Expander Card)
Item Specification
Inputs
Safety status SELV
Connector designation (inputs) AUDIO IN L AES/EBU, AUDIO IN R
Connector type Three- way XLR female
Input standard (analogue) Balance analogue
Clip Level 15 dB or 18 dB
Sampling rate 48 kHz
Input impedance 600 W or 20 kW
Input standard (digital) AES/EBU Digital
Termination 110 W
Sampling Rate Not applicable
Input rate 32, 44.1, 48 kHz (when using MPEG1 Level 2 or AC-3), see audio section for
further details.
Outputs
Safety status SELV
Connector designation (outputs) AUDIO OUT L AES/EBU, AUDIO OUT R
Connector type Three- way XLR male
Output standard (analogue) Balance analogue
Clip Level 15 dB or 18 dB FSR
Sampling rate Same as digital source rate
Output impedance 10 W (typically)
Output standard (digital) AES/EBU Digital
Output impedance 110 W
Output rate Same as digital source
When the unit is not powered the XLR IN L AES/EBU audio input defaults to AES/EBU with 110 W termination