Filter
Top Products
Operating the Equipment Locally
Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder Page 4-101
ST.TM.E10076.3
Major Channel Option
NOTE…
This option is only shown in ATSC mode.
To access the Major Channel option, press the Major Channel softkey in
the 2.Service Menu. This enables the major channel to be specified.
Minor Channel Option
NOTE…
This option is only shown in ATSC mode.
To access the Minor Channel option, press the Minor Channel softkey in
the 2.Service Menu. This enables the minor channel to be specified.
Logical Channel Option
To access the Logical Channel option, press the Logical Channel softkey
in the 1.Service Menu. This enables a number to be given to the Logical
Channel.
CA Input Option
NOTE…
This option is only shown if there are incoming services.
This option indicates the type of CA present on the input. It is set for
status only and cannot be changed.
BISS Key Code Option
NOTE…
This option is not available from Build version 2.2.
To access the BISS Key Code option, press the BISS Key Code softkey in
the 1.Service Menu. This enables the scrambling key used in BISS
scrambling mode to be set. The same scrambling code must be used at the
receive end to unscramble the transmission.
Enter up to 12 digits. If less then seven digits are entered, they are
prefixed with 0s (zero) to give a seven digit code.
Enc Session Word Option
Refer to Enc Session Word Option on page 4-96 for details.
Session Word Option
Refer to Session Word Option on page 4-96 for details.