Filter
Top Products
はじめに
はじめに
TASCAM DR-V1HD
33
3 – Preparation
Removing the card
1. Open the microSD slot cover on the right side panel.
2. Press the microSD card in gently and then release it to allow it to come
out.
CAUTION
Do not remove the microSD card from the unit when it is connected to a
computer via USB.
NOTES
microSD cards that meet microSD or microSDHC standards can be used •
with this unit.
A list of microSD cards that have been conrmed to work with this unit •
can be found on our website (http://tascam.com/).
Preparing a microSD card for use
In order to use a microSD card with this unit, you must rst format it with the
unit.
CAUTION
Formatting deletes all the data on a card.
1. Confirm that a microSD card is inserted in the unit, and turn the power
ON.
2. The following pop-up message appears when a new card or a card
formatted for use with another device is installed in the unit.
3. Press the F1( ) button (Yes) to start formatting the card.
Press the F3/HOME button (No) to cancel formatting. If you cancel
formatting, you will need to remove the card and use a dierent one.
4. When formatting completes, the Home Screen will open.
CAUTION
When formatting a card, make sure the unit is powered by a TASCAM PS-P520
AC adapter (sold separately) or that the batteries have sucient remaining
power.
NOTE
You can format a card at any time. (See “Formatting” on page 83.)