Filter
Top Products
はじめに
はじめに
TASCAM DR-V1HD
85
11 – Messages
The following is a list of the pop-up messages that may appear under certain conditions.
Refer to this list if one of these pop-up messages appears and you want to check the meaning or determine a proper response.
Message Meaning and response
Battery Empty The batteries are out of power. Replace them. Alternatively, use a TASCAM PS-P520 AC adaptor (sold separately).
Can’t Divide The position selected for dividing is not suitable (too close to the beginning or end of the le). Divide the le at a suitable
position.
Card Error The unit could not use the card properly. Replace the card.
Card Full The card has no remaining capacity. Erase unnecessary les or move them to a computer to make open space.
Dup File Name The DIVIDE function has caused the le name to be the same as that of an existing le. The DIVIDE function adds “_a” or “_b” to
the end of the original le name. Before dividing, connect the unit to a computer and edit the le name.
File Full The total number of folders and les exceeds 9999. Erase unnecessary items or move them to your computer.
File Name ERR The DIVIDE function has caused the le name to exceed 200 characters. The DIVIDE function adds “_a” or “_b” to the end of the
original le name. Before dividing, connect the unit to a computer and edit the le name to 198 characters or less.
File Not Found A le added to a playlist cannot be found. Please conrm that the le is in the active folder.
File Protected The le is read-only so it cannot be deleted. Use a computer to delete read-only les.
Format Error
Format CARD
The formatting of the card might be in-correct or the card might be broken. This message also appears if you format a card
using a computer connected by USB or if you insert an unformatted card in the unit. Always use the DR-V1HD to format cards
to be used with it. Change the card, or press the F1( ) button (YES) while this message appears to FAT format the card. FAT
formatting erases all data on the card.
I/O Too Short The interval between the IN and OUT points is too short. Set them at least one second apart.
Non-Supported The le is not a supported format. Please see “9 – Connecting with a computer” for le formats that this unit can use.
No PLAYLIST No les have been added to the playlist. Add a le to the playlist or change the play mode to something other than PLAYLIST.
Out Of Card Space The SD card does not have enough open space to use the DIVIDE function. At least as much open space as the size of the le
being divided is necessary.
Delete unneeded les from the card. Back up les that you might want later to a computer before deleting them.
PLAYLIST Full The playlist is full. You cannot add more than 99 les to a playlist.
Unsupported
Sampling Rate!!
In video recording mode, recording is not possible when the sampling frequency is set to 96kHz.
Set the sampling frequency to 44.1kHz or 48kHz.
Write Timeout Writing to the card timed out. Backup the les on the card to a computer and format the card.
NO SDCARD No microSD card is inserted in the recorder. Insert a card properly.
No File There is no le that can be viewed when browsing.
No Movie File There is no video le (mov) in the playback area.
No Audio File There is no audio le (wav) in the playback area.