Filter
Top Products
7 − Copy function
TASCAM DV-RA1000HD 51
5 Press the ENTER key.
The selected source projects or les are copied to
the HD.
After the copy operation is complete, the
DV-RA1000HD initiates a procedure to quit copy
mode.
During this procedure, the
DV-RA1000HD dis-
plays a progress bar. When the procedure is
complete, the unit displays the home screen.
Copying files and projects from the HD to DVD
You can copy data from the HD of DV-RA1000HD to a
DVD±RW or DVD±R disc.
1 Select HD to DVD in the copy menu screen.
2 Insert a copy destination DVD following the in-
structions on the screen.
The DV-RA1000HD displays a source project
selection screen.
If you insert an unsupported disc, an
error message appears. To continue the
copy operation, press the ENTER key. To
change the disc, press the CANCEL key. The
DV-RA1000HD ejects the disc and displays a
message that requests that you insert a disc.
For more information, see “Selecting a copy
mode and copy source” on page 49.
Figure 7.5: Selecting a source project
3 Select a project/le to copy.
You can select multiple projects.
You can also copy specied les inside a project,
instead of copying the entire project.
4 After you select a project, press the ENTER key.
If a project in the destination DVD uses the
same name as the selected source project, the
DV-RA1000HD displays a duplicate project
screen that lists all projects that use the same
•
name. Follow the procedure in the “Same project
name in the destination” section described above
to resolve the name duplicate issues, then press
the ENTER key.
A message requests conrmation to start copying
data to the DVD.
5 Press the ENTER key.
The selected source projects or les are copied to
the DVD.
After the copy operation is complete, a message
appears, asking whether you wish to copy the
data to another disc.
6 To copy the data to another disc, press the ENTER
key.
The
DV-RA1000HD automatically opens the tray.
Follow the steps 4 and 5 described above.
If you do not wish to copy the data to another
disc, press the CANCEL key.
The
DV-RA1000HD initiates a procedure to quit
copy mode.
During this procedure, the
DV-RA1000HD dis-
plays a progress bar. When the procedure is
complete, the unit displays the home screen.
Copying the data to a DVD±RW disc that
already contains data
If available space on the disc is smaller than
the total size of the projects selected for the
first copy operation, the DV-RA1000HD will
check the disc, open the tray, then display a
popup menu that requests that you insert a
disc.
•