Filter
Top Products
31
5.2 RECORD TIMER
The unit provides a weekly table, consisting of two periods of time each day for scheduled recording. This
option allows you to set the time each day that the unit will start and stop recording.
REC ENABLE :
The rec enable option is used to enable / disable the programmed scheduled recording.
ON: Enables the scheduled recording.
OFF: Disables the scheduled recording.
TIMER :
This option is used to set the time that the unit will start and stop recording each day in a
weekly format. There are two time periods each day available for scheduling. The time is
displayed in a 24-hour clock format. If there is a time overlap between two continual time period
settings, the device will automatically combine the two time-period settings into one combined
time period setting.
MAIN MENU
TIME/ TITLE
RECORD TIMER
RECORD
ALARM
COMMUNICATION
DISK
SYSTEM
GO TO TIMER PAGE
RECORD TIMER
REC ENABLE : OFF
TIMER : SET
MAIN PAGE
TIMER REC ENABLE
REC SCHEDULE
START END START END
S :06:00-16:00 12:00-18:00
REC SCHEDULE
START END START END
S :06:00-18:00 00:00-00:00
32
5.3 REC SETTING
This page allows you to set recording rate and recording quality, and to enable you to continue recording
when the disk is full.
REC RATE:
This option is used for adjusting the number of pictures recorded every second into a hard disk.
The recording rate controls the frequency at which the number of video pictures can be
recorded. For a NTSC unit, there are 10 different recording rates you can select from: 60F/S
(60 fields per second), 20F/S, 10F/S, 5F/S, 2.5F/S, 1.25F/S, 0.625F/S, 1 F/4S, 1F/6S, and
1F/8S. For a PAL unit, there are two different sets of recording rates for use with a camera or a
multiplexer, respectively. Please refer to the table in section 4.1 for details.
REC QUALITY:
This option is used to determine the quality of the image being recorded. There are 3 levels of
image quality you can select from: HIGH, STANDARD, and BASIC. Selecting HIGH image
quality will result in higher-resolution recorded images, and will normally take up more storage
space than a STANDARD or BASIC quality image does.
DISK FULL:
This option is used to determine the way to utilize storage media in the case that the specified
hard disk is full.
REWRITE: When the hard disk drive is full, the device continues recording by displacing the
old data.
STOP: When the hard disk drive is full, the device will stop recording.
MULTIPLEXER:
For optimum image recording please set this option to ON when the unit connected with a
multiplexer for use. Set this option to OFF when only it is connected with a single camera.
MAIN MENU
TIME/ TITLE
RECORD TIMER
RECORD
ALARM
COMMUNICATION
DISK
SYSTEM
GO TO REC PAGE
REC SETTING
REC RATE : 60 F/S
REC QUALITY : HIGH
DISK FULL : REWRITE
MULTIPLEXER : ON
MAIN PAGE
SET REC RATE
1-16