Filter
Top Products
4. Key Operation for Maintenance
4.1 Software version check
1. Push SETUP button in order to make it MENU mode.
2.Simultaneously press
PAUSE/STEP and
buttons for
3seconds or more.
3. The blinking message of software version no. is appeared.
Note: Please refer how to update software to 3.3 Updateing System
Software in OPERATING MANUAL.
4.2 Factory default setting
This setting is used when eliminating the operation logs in addition to the DEFAULT setting in system setup menu.
The contents recorded in HDD are not erased. Reformat will be carried out if needed.
1. Push SETUP button in order to make it MENU mode.
2.Simultaneously press
REC and
buttons for 1seconds or
more.
3. The blinking message of FACTORY DEFAULT is appeared. Wait
for about 20 seconds.
The buzzer sounds two times with short beeps.
MAIN MENU
TIME/ TITLE
RECORD TIMER
RECORD
ALARM
COMMUNICATION
DISK
SYSTEM
VER 2.5T Jan 03 2002 B
GO TIME/TITLE PAGE
2-7