Filter
Top Products
2. Hard disk recording
KV-HD01A use standard IDE hard disk as its main storage. User needn’t to partition nor format hard disks before
attaching them to KV-HD01A. However, jumper setting of master/slave is still needed. System support up to 3
hard disks, named HD1, HD2 and HD3. HD1 and HD2 are used as internal hard disks, they are attached to the
same cable, conflict of master/slave must be avoided. HD3 can be set to REC/PLAY or BACKUP usage from
setup MAIN MENU – DISK SETTING menu. When all 3 hard disks was attached and HD3 set to REC/PLAY, the
storage capacity could reach 80 (79)MB *3 = 240 (237)MB.*
Disk setup and the record order
When have not been attached only HD3, don't set the menu setup to HD3 for BACKUP.
NO BUCKUP SOURCE message will be appeared. IF REC button pushed, the unit will start to record that is not
related the menu setup.
HD3 only (default)
Recorded
It depends on the setup menu
whether it returns to the top and
record is continued, or it stops at the
end of HDD.
HD1 (added)
Recorded
HD2 (added)
Recorded
HD3 (default)
HD3 can be set to REC/PLAY o
r
BACKUP usage from setup menu.
2-3