Filter
Top Products
26
EN
For the First Time Use
Right after the purchase of the unit, do the Initialise
Setting by doing the following procedures.
This menu may not appear if you have already turned
on the unit.
1 After making all the necessary
connections, turn on the TV. Select
the appropriate external input
channel.
(See pages 23 to 24.)
2 Press [ ON / STANDBY].
After displaying the opening picture for 3 seconds,
the OSD Language Menu will appear.
Refer to “OSD Language Setting” on page 27 to
select a language for the on-screen displays and
the menus, “Channel Setting” on page 27 to setup
the channels, and “Setting the Clock” on page 30
to set the clock.
If you press [PLAY P] at this point, “English” will
be selected automatically and step 3 can be
skipped.
3 Select the desired setting using
[Cursor
U / D], then press [ENTER].
4 Press [ENTER] to start Auto Channel
Tuning.
If you like to skip this step, press [RETURN].
5 Use [Cursor U / D / L / P] to set
current time then press [ENTER].
Basic Setup
Français
Español
Deutsch
Italiano
Svenska
Nederlands
English
OSD Language
Start Auto-tuningStart Auto-tuning
OK
Clock Setting --/--/--(---) --:--
Clock Setting
01 / 01 / 2007 (Mon) 19 : 34
E3B90ED_EN.book Page 26 Friday, February 23, 2007 12:38 PM