Filter
Top Products
45
EN
Introduction Connections Basic Setup Playback
Editing
VCR Functions Others
Function Setup
Recording
Editing the Timer Programming
Information
1 Press [TIMER PROG.].
Timer Programme List will appear.
To change the setting of a programme:
1 Select the programme you want to edit using
[Cursor
U / D], then press [ENTER].
•
Use
[SKIP
F
]
or
[SKIP
B
]
to jump to next /
previous Timer Programme List page.
2 Move to the item you want to change using
[Cursor
L / P], then press [Cursor U / D] to
change the setting.
3 Press [ENTER] to confirm.
To delete a programme from the list:
1 Select the programme you want to delete using
[Cursor
U / D] (Do not press [ENTER]), then
press [CLEAR].
2 Select “Yes” using [Cursor
L / P], then press
[ENTER]. The programme is now deleted.
2 Press [TIMER PROG.] to exit.
Note
• This unit automatically lists up the programmes in
the order of start time every time you access the
Timer Programme List.
VPS (Video Programme System) /
PDC (Programme Delivery Control)
The Video Programme System (VPS) or Programme
Delivery Control (PDC) assures that the TV
programmes you have programmed for Timer
Recording are recorded exactly from beginning to
end, even if the actual broadcasting time differs from
the scheduled time due to a delayed start or extension
of the programme duration. Furthermore, if a
programme is interrupted, the recording will also be
interrupted automatically and resumed when the
programme starts again.
If the VPS / PDC signal drops out because the
broadcast signal is weak, or if a broadcasting station
does not transmit a regular VPS / PDC signal, the
Timer Recording is performed in normal mode
(without VPS / PDC) even if it was programmed for
VPS / PDC. If the starting time of the VPS / PDC
Timer Recording is between 0:00 and 3:59 on a given
day, the VPS / PDC function will operate from 20:00
on the previous day to 4:00 on the next day. If the
starting time of the VPS / PDC Timer Recording is
between 4:00 and 23:59 on a given day, the VPS /
PDC function will operate from 0:00 on the given day
to 4:00 on the next day. This means that if the relevant
programme is broadcasted within this period, it is
recorded correctly. If the timer is not programmed
correctly, the incorrect timer setting stays in effect
unless you cancel it. To cancel an incorrect timer
setting, refer to “Editing the Timer Programming
Information” on this page.
Hints for Timer Recording
The priority of overlapped settings:
When the Timer Programmings are overlapped, you
will receive a warning message.
If this happens, check the Timer Programme List and
change it as necessary. Otherwise, the unit will
prioritise recording as described below.
If the starting time is same:
• The Timer Programming set first (PROG. 1) has
priority.
Different start time and different end time:
• A program with the earlier start time has the priority.
CH
Date
Start End Mode VPS/PDC
Timer Programme
Station
---
---
-- (---)
-- : -- -- : -- SP HDD ---
P02
06 (Mon)
22 : 00 23 : 00 SP HDD Off
---
-- (---)
-- : -- -- : -- SP HDD ---
---
-- (---)
-- : -- -- : -- SP HDD ---
---
-- (---)
-- : -- -- : -- SP HDD ---
---
-- (---)
-- : -- -- : -- SP HDD ---
---
-- (---)
-- : -- -- : -- SP HDD ---
---
-- (---)
-- : -- -- : -- SP HDD ---
Skip
HDD Remain 72h00m(SP)
Page 1/4
HDD Remain 72:00(SP)
Page 1/4
01/01/07(Mon)19:34
CH
Date
Start End Mode
Timer Programme
Station
---
---
-- (---)
-- : -- -- : -- SP HDD ---
---
-- (---)
-- : -- -- : -- SP HDD ---
---
-- (---)
-- : -- -- : -- SP HDD ---
---
-- (---)
-- : -- -- : -- SP HDD ---
---
-- (---)
-- : -- -- : -- SP HDD ---
---
-- (---)
-- : -- -- : -- SP HDD ---
---
-- (---)
-- : -- -- : -- SP HDD ---
Skip
HDD Remain 72h00m(SP)
Page 1/4
HDD Remain 72:00(SP)
Page 1/4
P01
06 (Mon)
22 : 00 23 : 00 SP HDD Off
VPS/PDC
01/01/07(Mon)19:34
CH
Date
Start End Mode VPS/PDC
Timer Programme
Station
---
---
-- (---)
-- : -- -- : -- SP HDD ---
P02
06 (Fri)
22 : 00 23 : 00 SP HDD Off
---
-- (---)
-- : -- -- : -- SP HDD ---
---
-- (---)
-- : -- -- : -- SP HDD ---
---
-- (---)
-- : -- -- : -- SP HDD ---
---
-- (---)
-- : -- -- : -- SP HDD ---
---
-- (---)
-- : -- -- : -- SP HDD ---
---
-- (---)
-- : -- -- : -- SP HDD ---
Skip
HDD Remain 72h00m(SP)
Page 1/4
HDD Remain 72h00m(SP)
Page 1/4
01/01/07(Mon)19:34
Clear the setting?Clear the setting?
Yes
No
PROG. 1
PROG. 2
PROG. 1 PROG. 2
PROG. 2
recording
will start
after
PROG. 1
recording i
s
completed.
Actual
recording
The first 15 seconds (approx.) will be cut off.
PROG. 1
PROG. 2
PROG. 1
PROG. 2
PROG. 3
PROG. 3
The first 15 seconds (approx.) will be cut off.
Actual
recording
E3B90ED_EN.book Page 45 Friday, February 23, 2007 12:38 PM