Filter
Top Products
27
EN
Introduction Connections Basic Setup Playback
Editing
VCR Functions Others
Function Setup
Recording
OSD Language Setting
Follow the steps below to change the OSD Language.
1 Press [SETUP] in stop mode.
Setup Menu will appear.
2 Select “Initial Setting” using
[Cursor
U / D], then press [ENTER].
3 Select “OSD Language” using
[Cursor
U / D], then press [ENTER].
4 Select the desired language using
[Cursor
U / D], then press [ENTER].
The selected language will be checked and
activated.
5 Press [SETUP] to exit.
Channel Setting
Auto Tuning
If you have already set the channels when you first
turned on the unit, you can skip this section.
After resetting the settings or whenever you move to a
new area, we recommend you to programme available
channels in your area with the following procedures.
1 Press [SETUP] in stop mode.
Setup Menu will appear.
2 Select “Initial Setting” using
[Cursor
U / D], then press [ENTER].
3 Select “Channel Setting” using
[Cursor
U / D], then press [ENTER].
4 Select “Auto Tuning” using
[Cursor
U / D], then press [ENTER].
The unit will start storing channels available in
your area.
Setup Menu
01/01/07(Mon) 19:34
Disc Management
Editing
Dubbing
Timer Programme
Title List
Initial Setting
Digital Audio Setting
Playback
Recording
Display
01/01/07(Mon) 19:34
Initial Setting
Clock Setting
Channel Setting
TV Aspect
Select Video
Video Out
OSD Language
01/01/07(Mon) 19:34
Initial Setting
Clock Setting
Channel Setting
TV Aspect
Select Video
Video Out
OSD Language
Français
Español
Deutsch
Italiano
Svenska
Nederlands
English
Setup Menu
01/01/07(Mon) 19:34
Disc Management
Editing
Dubbing
Timer Programme
Title List
Initial Setting
Digital Audio Setting
Playback
Recording
Display
Initial Setting
OSD Language
Clock Setting
TV Aspect
Select Video
Video Out
Channel Setting
01/01/07(Mon) 19:34
01/01/07(Mon) 19:34
Initial Setting
OSD Language
Clock Setting
TV Aspect
Select Video
Video Out
Channel Setting
Manual TuningManual Tuning
MoveMove
Auto Tuning
E3B90ED_EN.book Page 27 Friday, February 23, 2007 12:38 PM