Filter
Top Products
92
EN
Initial Setting
1 Press [SETUP] in stop mode.
Setup Menu will appear.
2 Select “Initial Setting” using
[Cursor
U / D], then press [ENTER].
3 Select “Video Out” using
[Cursor
U / D], then press [ENTER].
Video Out (Default: SCART(RGB))
Set the video output signal to be fixed accordingly to
your TV set.
4 Select the desired setting using
[Cursor
U / D], then press [ENTER].
The selected setting will be checked and
activated.
SCART(RGB):
Select “SCART(RGB)” if your TV has a scart
terminal and connected to it.
Component (Progressive):
If your TV is compatible with progressive
scanning, select “Component (Progressive)”.
Component (Interlace):
If your TV has component jacks, select
“Component (Interlace)”.
5 When you finish with the setting,
press [SETUP] to exit.
Setup Menu
01/01/07(Mon) 19:34
Disc Management
Editing
Dubbing
Timer Programme
Title List
Initial Setting
Digital Audio Setting
Playback
Recording
Display
01/01/07(Mon) 19:34
Initial Setting
Clock Setting
Channel Setting
TV Aspect
Select Video
OSD Language
Video Out
01/01/07(Mon) 19:34
Initial Setting
OSD Language
Clock Setting
Channel Setting
Select Video
TV Aspect
Component(Progressive)Component(Progressive)
Component(Interlace)Component(Interlace)
SCART(RGB)SCART(RGB)
Video Out
E3B90ED_EN.book Page 92 Friday, February 23, 2007 12:38 PM