Filter
Top Products
69
EN
Introduction Connections Basic Setup Playback
Editing
VCR Functions Others
Function Setup
Recording
Special Playback
Resume Playback
You can resume playback from the point where you
stopped it before.
If you are playing the HDD, press [HDD] first.
If you are playing a disc, press [DVD] first.
1 During playback, press [STOP S].
Press [STOP S] twice will cancel the Resume
function.
2 Press [PLAY P].
In a few seconds, playback will resume from the
point at which you stopped it before. Even if you
turn off the unit, you can resume playback at the
same point after the unit is powered on.
You can set a resume point per every title.
• If you play back from the Title List Menu, you can
choose “Play”. Otherwise the playback will start from
the resume point of the last played title.
•Press [STOP S] twice at step 1 if you do not want to
set a resume point. In this case, next time you press
[PLAY P], the playback will start from the beginning
of the last recorded title in the Title List.
You can set only one resume point per disc.
• If a resume point is set, the playback will start from
the resume point next time you press [PLAY P].
•Press [STOP S] twice at step 1 if you do not want to
set a resume point. In this case, next time you press
[PLAY P], the playback will start from the beginning
of the disc.
You can set only one resume point per disc.
• If a resume point is set, the playback will start from
the resume point next time you press [PLAY P] if
you are playing an Audio CD, DivX
®
, JPEG or Video
CD with PBC off. As for the MP3 files, the resume
playback will start from the beginning of the track
last played.
•Press [STOP S] twice at step 1 if you do not want to
set a resume point. In this case, next time you press
[PLAY P], the playback will start from the beginning
of the disc.
To cancel the resume playback and start playing
back the disc from the beginning:
Press [STOP S] while playback is stopped.
Note
• For Video CDs, if you turn “PBC” on using the
setting menu, the resume function is cancelled.
• Resume point will be lost when you;
- Open / Close the disc tray.
Rapid Playback
Rapid Play function is available only during playback.
Available only on discs recorded in the Dolby Digital
format, Rapid Play plays back in a slightly faster/
slower speed while keeping the sound quality just as
normal playback.
1 During playback, press
[1.3x/0.8x PLAY].
P :Press [1.3x/0.8x PLAY] once during
playback. Plays back approximately at 0.8
times of normal playback.
P :Press [1.3x/0.8x PLAY] twice during
playback.
Plays back approximately at 1.3 times of
normal playback.
P :Press [1.3x/0.8x PLAY] thrice to play back
in normal speed. No effects.
2 Press [PLAY P] to resume the
normal playback.
Note
• Audio (language) setting cannot be changed while
using this mode.
• This feature may not work at some point in a disc.
• Audio is PCM during Rapid play mode.
• When you select “PAL” in “TV System” (see page
97), this function is not available with discs recorded
using the NTSC system.
For HDD:
For DVDs:
For Video CD, Audio CD, MP3, JPEG and DivX
®
:
HDDHDD
DVD-VDVD-V DVD-RWDVD-RW
VR
DVD-RWDVD-RW
Video
DVD-RDVD-R D
D
VD+R
VD+R
W
W
DVD+RW D
D
VD+R
VD+R
DVD+R CD
CD
CD
VCD
VCD
VCD
(PBC OFF)
MP3MP3 JPEG
JPEG
JPEG
DivX
DivX
®
DivX
®
HDDHDD
DVD-VDVD-V DVD-RWDVD-RW
VR
DVD-RWDVD-RW
Video
DVD-RDVD-R D
D
VD+R
VD+R
W
W
DVD+RW D
D
VD+R
VD+R
DVD+R
E3B90ED_EN.book Page 69 Friday, February 23, 2007 12:38 PM