Filter
Top Products
89
EN
Introduction Connections Basic Setup Playback
Editing
VCR Functions Others
Function Setup
Recording
Tour of the Setup Menus
The following table shows the items which you can change the setting and their default settings. Refer to the
following table for your convenience.
Function Setup
Setup Menu Items Selection
(highlight is the default)
Contents
Initial Setting OSD Language
Page 27
Français
Español
Deutsch
Italiano
Svenska
Nederlands
Set the language for OSD
(on-screen display).
Clock Setting Clock Setting
Page 31
Set the clock manually.
Auto Clock Setting
Page 30
Set the clock automatically.
Channel Setting
Auto Tuning
Page 27
Tune the channels
automatically.
Manual Tuning
Page 28
Tune the channels manually.
Move
Page 29
Move the channel to different
position.
TV Aspect
Page 32
4 : 3 Pan & Scan
16 : 9 Wide
16 : 9 Shrink
Set a picture size according to
aspect ratio of your TV.
Select Video
Page 56
S-Video In
Set the video input type for
the external input.
Video Out
Page 92
Component (Progressive)
Component (Interlace)
Sets the video output signal to
be fixed accordingly to your
TV set.
Digital Audio
Setting
Down Sampling
Page 93
96kHz
Set whether the sound
recorded at 96 kHz is down
sampled to 48 kHz or not.
Dolby Digital
Page 93
PCM
Set the type of sound signal
output from the digital audio
output jack.
MPEG
Page 93
Bit Stream Set the digital audio output
signal specification.
DTS
Page 94
Off
Set whether DTS signal is
output or not.
Dynamic Range Control
Page 94
Off
Compress the range of sound
volume.
English
4 : 3 Letter Box
Video In
SCART(RGB)
48kHz
Bit Stream
PCM
On
On
E3B90ED_EN.book Page 89 Friday, February 23, 2007 12:38 PM