Filter
Top Products
98
EN
Recording
1 Press [SETUP] in stop mode.
Setup Menu will appear.
2 Select “Recording” using
[Cursor
U / D], then press [ENTER].
3 Select a desired item using
[Cursor
U / D], then press [ENTER].
4 Refer to 1. to 3. on this page and set
the selected item.
5 When you finish with the setting,
press [SETUP] to exit.
1. Noise Reduction (Default: Off)
Set the noise reduction to reduce some noise in
playback picture or to record in LP/EP/SLP mode.
(Follow steps 1 to 2 above.)
Select “Noise Reduction” using
[Cursor
U / D], then press [ENTER].
Option window will appear.
Select the desired setting using
[Cursor
U / D], then press [ENTER].
The selected setting will be checked and
activated.
2. Fast Dubbing Audio (Video Mode)
(Default: Off)
On: When recording a bilingual programme to the
HDD and to make the Fast Dubbing (HDD to DVD
(Video Mode)) available, the unit only records
either Main or Sub audio. (See page 40.)
Off: When recording a bilingual programme to the
HDD, the unit will record both Main and Sub
audio, however, this makes it impossible to
perform the Fast Dubbing (HDD to DVD (Video
Mode)).
(Follow steps 1 to 2 on the left.)
Select “Fast Dubbing Audio (Video
Mode)” using [Cursor
U / D], then
press [ENTER].
Option window will appear.
Select the desired setting using
[Cursor
U / D], then press [ENTER].
The selected setting will be checked and
activated.
3. Initialise (Default: No)
Initialise the setting in Recording.
(Follow steps 1 to 2 on the left.)
Select “Initialise” using
[Cursor
U / D], then press [ENTER].
Confirmation window will appear.
Select “Yes” using [Cursor L / P],
then press [ENTER].
Your setting in Recording will be initialised.
Setup Menu
01/01/07(Mon) 19:34
Disc Management
Editing
Dubbing
Timer Programme
Title List
Initial Setting
Digital Audio Setting
Playback
Recording
Display
01/01/07(Mon) 19:34
Recording
Noise ReductionNoise Reduction
Bilingual Recording AudioBilingual Recording Audio
Fast Dubbing Audio (Video Mode)Fast Dubbing Audio (Video Mode)
External Input AudioExternal Input Audio
Recording Audio Select [XP]Recording Audio Select [XP]
InitialiseInitialise
Auto Chapter [HDD]
Weak
Strong
Off
Off
On
01/01/07(Mon) 19:34
Initialise
No
Yes
Initialising the recording settings.
The Settings will be returned to
their factory default.
OK to proceed?
E3B90ED_EN.book Page 98 Friday, February 23, 2007 12:38 PM