Filter
Top Products
50
EN
[HDD to DVD dubbing]
[Videotape to DVD dubbing]
2 The dubbing will stop automatically
when it reaches the end of the title or
videotape. If you want to stop the
dubbing manually, follow the
instructions below.
To stop the dubbing in progress:
1 Press [DUBBING] for 4 seconds. Confirmation
window will appear.
2 Select “Yes” using [Cursor L / P], then press
[ENTER].
3 Press [ENTER] to exit.
Note
[HDD to DVD dubbing]
• You cannot switch the device mode except between
HDD and VCR during HDD to DVD dubbing. No
limitation for High Speed Dubbing.
[Videotape to DVD dubbing]
• When dubbing starts, the video image may be
distorted because of the Digital Tracking function.
This is not a malfunction. Play the videotape until
the image clears up and then start the dubbing.
• Playback audio is determined by the setting you
make in “Selecting the Sound Mode” section on
page 102.
• Dubbing takes as much time as the playback does.
• You cannot switch the device mode except between
HDD and DVD during videotape to DVD dubbing.
• If you want to watch the dubbed material, after the
VCR to DVD dubbing, press [DVD] first then press
[PLAY P].
Preparing to dub.
Please wait for a moment.
10%
HDD
DVD
Cancelling the dubbing.
OK to proceed?
Yes
No
E3B90ED_EN.book Page 50 Friday, February 23, 2007 12:38 PM