AMD Confidential
User Manual November 21
st
, 2008
14 Chapter 3: Graphical User Interface
disconnect the selected device from all its connections. Please note that this feature is not
supported by the public release version of the simulator.
Table 3-1 lists each component in the “cheetah_1p.bsd” computer. For more information
about devices and possible device configuration, please refer to Section 7, “Device
Configuration” on page 53.
Standard debugging support.
AMD 8
th
Generation Integrated
Northbridge
Integrated Northbridge treated as a
separate device in simulation.
Southbridge supporting Hard drives,
DVD-/CD-ROM drives, Floppy drives,
USB ports, CMOS, and POST ports.
AMD-8132™ PCI-X
Controller
The AMD-8132 PCI-X Controller is a
HyperTransport tunnel that provides
two PCI-X buses and two IOAPICs.
These PCI-X buses may or may not be
configured as hot-plug-capable,
depending on the platform.
Matrox G400 Graphics Device
Simulated VGA/SVGA device.
Simulated PCI Bus which can connect
multiple PCI devices (such as bridges
and PCI VGA).
SuperIO Chip with keyboard, mouse
and floppy.
Device that contains a configurable
BIOS ROM image.
The SMB hub device is used to connect
one SMBus to any of four SMBus
branches.
The PCA9548 is an 8-channel System
Management Bus (SMB) switch.
The AT24C device is a Serial
EEPROM device.
