A SERVICE OF

logo

Open as PDF
next previous
74 SPARC Enterprise T5120 and T5220 Servers Installation Guide • August 2007
2. Attach a mounting bracket to the right side of the server chassis.
a. Position the mounting bracket against the chassis (
FIGURE C-5) so that the
slide rail lock is at the front and the keyed openings on the mounting
bracket are aligned with the locating pins on the side of the chassis.
FIGURE C-5 Attaching an Express Rail Mounting Bracket to the Chassis
b. With the heads of the four locating pins protruding through the keyed
openings in the mounting bracket, slide the mounting bracket toward the
front of the chassis until the bracket locks into place with an audible click.
c. Verify that all four locating pins are trapped in the keyed openings and that
the third from the front locating pin has engaged the mounting bracket lock
(
FIGURE C-5).
3. Attach the second mounting bracket to the left side of the server chassis.