A SERVICE OF

logo

61
APPENDIX
A
Updating the Firmware
The flashupdate command updates both the service processor firmware and the
server firmware.
The flash image consists of the following components:
Service Processor firmware
OpenBoot
POST
Reset/Config
Sequencer
Partition description
Updating the Firmware
To use the features and fixes in subsequent firmware releases, perform “To Update
the Firmware” on page 61.
To Update the Firmware
1. Ensure that the ILOM service processor network management port is
configured.
This is required to access the new flash image over the network. See “To
Configure the Service Processor Network Management Port” on page 48.