Chapter 3 Powering On the System 59
▼ To Reset the System
● If it is necessary to reset the system, use the shutdown -g0 -i6 -y
command.
It is not necessary to power the system off and on to simply reset the system.
▼ To Power Cycle the System
If a simple reset does not clear a system problem, you can power the system off and
on with this procedure.
1. Shut down the Solaris OS.
At the Solaris OS prompt, type the shutdown -g0 -i0 -y command and then
type h when prompted to halt the Solaris OS and to return to the ok prompt.
2. Switch from the system console prompt to the service processor console
prompt by issuing the #. escape sequence.
Creating new dsa public/private host key pair
The system is ready.
wgs94-181 console login:
# shutdown -g0 -i6 -y
# shutdown -g0 -i0 -y
# svc.startd: The system is coming down. Please wait.
svc.startd: 91 system services are now being stopped.
Jun 12 19:46:57 wgs40-58 syslogd: going down on signal 15
svc.startd: The system is down.
syncing file systems... done
Program terminated
r)eboot, o)k prompt, h)alt?
ok #.
->
