82 SPARC Enterprise T5120 and T5220 Servers Installation Guide • August 2007
installation instructions, optional components,
reference, 3
installing
mounting brackets, 71
installing optional components, 3
inventory list, xv
IP address, 4
L
LEDs, ports, and slots illustrated, 7, 8
left and right sides defined, 15
levers, locking, See "slide rail assembly locks"
locating pins for mounting brackets, 71
locations of ports, slots, and LEDs (illustration), 7, 8
locks, See "slide rail assembly locks"
logging into service processor
using network management port, 46, 52
using serial management port, 46, 47
M
map of OpenBoot PROM devices, 56
minimum cable connections, 6
modem not for use with the SER MGT serial
management port, 35
mounting bracket
locating pins on chassis, 71
preparation for installation, 71
removing from slide rail, 71
unlocking, 71
mounting screws for rack, 21
N
netmask, 4
network management port
configuring and enabling, 46
not operational until configured, 5, 46
null modem cable adapters, 37
null modem cable for TTY serial port, 37
O
OpenBoot PROM device map, 56
optional components, installation instructions in
service manual, 3
P
parity for serial terminal, no, 43
password command, 47
passwords, ILOM, 42
path names, 56
pins, mounting bracket locating, 71
ports, slots, and LEDs illustrated, 7, 8
power cycling the system, 59
powering on the system for the first time, 41
poweroff command, 60
poweron command, 54
R
removing server from rack, 39, 79
reset
resetting the service processor with reset
/SP,51
resetting the system with uadmin,59
right and left sides defined, 15
right side defined, 15
RJ-45 cable, 6
S
screws for rack mounting, 21
serial terminal
required before powering on, 43
settings, 43
service processor
access with network management port, 52
access with serial management port, 47
connecting to the system console, 55
network management port not operational until
configured, 5
port locations illustrated, 33
powering on for the first time, 43
powering on the system, 53
resetting, 51
See also ILOM
set command, 49
set command, 49
show /SP/network command, 50
show-disks command, 57
slide rail spacing tool, 22
slots, ports, and LEDs illustrated, 7, 8
Solaris media kit contents, 6
