Filter
Top Products
12-19
Module I/O Specifications
A11 Receiver Mixer
A11 Receiver Mixer
No extender card required.
Power Supplies
Inputs
NOTE: Ensure the reference setting and RF Analyzer are set to the same frequency.
LO (Local Oscillator) Frequency will be 114.3 MHz or 614.3 MHz away from frequency
set on RF Analyzer page depending on which one is furthest away from chosen analyzer
frequency. See Figure 4-5 on page 12-20 for a typical display.
+5 V PC1 70 mA
GND Chassis
From A23 Input Section
1st_MIX_IN J2
Frequency Range 0.4 to 1000 MHz
Level - using known reference
connected to RF IN/OUT
-20 dB compared to reference
setting
From A17 Step Loop B
EXT_REF_IN J1
Frequency Range 500 to 1000 MHz
Input Level 3 ± 3 dBm