Agilent Technologies 8922 VCR User Manual


 
3-2
Verifying Performance
Introduction
Introduction
Because of the specialized nature of the HP/Agilent 8922 and the equipment required to
support it, it is recommended that calibration and repair be performed only by specially
equipped Agilent Technologies service centers.
A list of specifications and verfication tests can be found in the HP/Agilent 8922x User’s
Guide.
Verification
Performance Test Software provided with the product is used to verify the electrical
performance of the HP/Agilent 8922 GSM Test Set. If the instrument passes this
verification, its operation and specifications are assured within the measurement
uncertainties provided in the performance test print out.
Installing and Operating the Software
Performace Test Software
This is supplied on a 3.5-inch, double-sided floppy disk and is written to run with BASIC
5.0 and later. Modifications to the program should be limited to changing the default
addresses and storing copies for back-up purposes.
Understanding the Tests
Test Descriptions contains a description of each test that is performed by the Performance
Test software. This description is intended to help locate problems if the software fails to
execute properly or to help users understand the test methodology that is used in each
performance test. The descriptions are not step by step procedures for manual
performance tests.