![](http://pdfasset.owneriq.net/5/6a/56a15751-277e-4487-a037-d9afede6288b/56a15751-277e-4487-a037-d9afede6288b-bg18.png)
1-14
Localizing the Problem
If Power-Up Happened Correctly
• Select CW/AF ANL from the list of choices, and read the CW Freq(5)and CW Power
(6) fields.
Figure 1-8 CW Readings
Where to Go Next
• If the analyzer measurement was within the specification, go to the next section,
“Checking the AF Analyzer using the AF Generator”.
• If the measurement was faulty, go to Chapter 2, “Running Diagnostics”, and run the test
related to the RF Analyzer.
56