Filter
Top Products
1-15
Localizing the Problem
If Power-Up Happened Correctly
Checking the AF Analzyer Using the AF Generator
This section tests the AF Analyzer with the AF Generator as a source. The AF Generator
settings are the same as the first task, and displays the CW MEAS/AF ANL screen.
• Connect the AUDIO OUT to the AUDIO IN.
Figure 1-9 Front Panel Connections for the Audio Check
• Select More and from the list, select CW MEAS/AF ANL.
• Highlight AF Anl In and select AUDIO IN (1).
• Read the AC Level (2) and the AF Freq (3) reading.
Figure 1-10 Audio Measurements
2
3
1