![](http://pdfasset.owneriq.net/5/6a/56a15751-277e-4487-a037-d9afede6288b/56a15751-277e-4487-a037-d9afede6288b-bg17.png)
1-13
Localizing the Problem
If Power-Up Happened Correctly
• Set the RF Analyzer Frequency field to 935 MHz (1).
• Set the RF Analyzer Amplitude field to 10 dBm (2).
• Set the Mod Source GMSK field to Off (3).
• Select More in the bottom right-hand corner of the screen (4).
Figure 1-7 RF Generator/Analyzer Settings
12 3
4