Filter
Top Products
Appendix
B
Details of Initialization Command Functions
Initializing
Device
*RST:
Initializes the device. (Common to the GPIB and US-232C options)
The *RST command switches the device into the following state.
(1)
Switches the device-specific functions to the initial state regardless of the past use. On this device,
the command switches the functions to the same state as that when the power switch is turned
ON.
(7)
Switches the device to the OCIS.
(3) Switches the device to the OQIS.
The
*RST command has no effects on the following items.
(1
)
IEEE488.2
interface state
(2)
Device address
(3)
Output queue
(3)
Service request enable register
(5)
Standard event status enable register
(6)
Power-on-status-clear flag setting
(7)
Structure data to have effects on the device standards
(8)
Macro defined by the
DMC
command
(9)
Response message to the PUD query
(
10)
Response message to the RDT query
(Items
8
to
10
are not supported by this device.)