Filter
Top Products
5.1
Common
IEEE488.2
*RCL Recall Command
Parameter <DECIMAL NUMERIC PROGRAM DATA>
0 to 10
Function Calls the memory of a specified number and, by doing so, returns the device to the previous
state.
There is no limit to the state to be loaded. See the Table 7-1 in the Section 7.5 "Parameter".
As an SCPI command which has the same function,
:
SYSTem
:
MEMory
:
RECall is avail-
able.
Example of use
Calls the information stored in memory number
1
and performs setting.
>
*RCL 1
*OPT? Option Identification
Query
Response
Function
<ARBITRARY ASCII RESPONSE DATA>
Characters to correspond to the option or unit
O~tion
Interface (Bit Rate) selection condition option
Option
04
03,062
M,
6,125 M, 12,249
M
Character
Interface (Bit Rate) selection condition option
Standard
l
2,488 M, 4,977 M. 9,953
M
Interface (Bit Rate) selection condition option
Option 0
1
l
2,494
M,
3.988 M, 9,977
M
Interface (Bit Rate) selection condition option
Option 02
l
2,666
M,
5.332 M, 10,644
M
OPT0
OPT
1
OPT2
Reports on the list of options and units mounted.
Reports on options and units mounted all delimited by a comma.
Interface (Bit Rate) selection condition option
Option 05
l
3,069 M. 6,138 M, 12,276
M
Interface (Bit Rate) selection condition option
Option 06
02,677 M, 5,355 M, 10.709
M
Interface (Bit Rate) selection condition option
Option
07
l
2,578
M,
5,156
M,
lO,3 13 M
Example of use
Options
01
and 02 are mounted.
>
.OPT?
<
OPT1
,
OPT2
OPT5
OPT6
OPT7