Filter
Top Products
Section
1
Outline
Interface
Function
The
MP1777A
has
a
connector for remote control on the back face.
Remote control of devices is enabled
by
fitting GPIB.
The GPIB setting is performed on the Secondary system screen in the Main setup screen.
GPIB
interface:
The GPIB interface for this device conforms to the IEEE (Institute of Electrical and Electronic Engi-
neers) standards, 488.1-1987. The software conforms to the standards IEEE488.2 and
SCPI
(Standard
Commands for Programmable Instruments). (See the Section
7
for more infom~ation.)
This device incorporates the following interface functions.
Control of functions except for certain functions such as power source switch and Local
key.
Reading of all the setup conditions and screen display.