Filter
Top Products
114
Changing the Camera Server Settings
Items related to recording schedule setting are as follows. Refer to the Camera Server
manual for details.
●
User Name and Password
Set the user name and password for the Camera Server. You cannot set them with the
VK-64/VK-16.
●
Motion detection recording
If the Camera Server is the VB-C50i/VB-C50iR, VB-C50FSi, VB-C50Fi, or VB150, you
can configure the Motion Detection settings on the Camera Server.
To configure the Motion Detection settings on the VB-C50i/VB-C50iR, VB-C50FSi, VB-
C50Fi, or VB150, you must install the VB Administration Tools supplied with the Camera
Server in advance. You can set up to four Motion Detection areas. Be sure to set a
recording schedule to execute the specified Motion Detection recording using the
Schedule Setting Tool.
For a VB150 (“Video Input” must be set to “Single”), the Motion Detection settings are
configured using the normal VK-64/VK-16 Motion Detection Settings dialog (➝ P. 119).
If the Motion Detection settings are configured on the Storage Server, the load on the
CPU may go high depending on the detection settings and the number of Camera
Servers, and affect the recording. We recommend that you configure the Motion
Detection setting at the Camera Server.
●
Quality
You can set the video quality. The Motion Detection settings are affected by the video
quality setting of the Camera Server. After configuring the Motion Detection settings, do
not change the video quality on the Camera Server.
●
Camera Name
Set the name of the camera displayed in the Camera Server list. You cannot set them
with the VK-64/VK-16.