Filter
Top Products
249
9
Troubleshooting
Messages Cause
An attempt was made to
change/delete the Storage Server
while there are camera server
settings that have not been saved.
An attempt was made to delete the
Master Storage Server.
The host name or IP address was
invalid when OK was pressed.
The port number was invalid when
OK was pressed.
An attempt was made to add or edit a
zone in the Storage Server without
entering the name.
An attempt was made to register a
location name that is already
registered.
An attempt was made to register a
location without entering the name.
An attempt was made to delete the
location for which a zone has been
added.
An attempt was made to add a zone
while the location has not been
registered.
An attempt was made to add a zone
with a name that has been already
registered.
An attempt was made to register a
zone without entering the name.
An attempt was made to delete the
zone for which a camera server has
been added.
The camera server settings have
not been saved. Save or delete the
settings before changing the
Storage Server settings.
The Master Storage Server cannot
be deleted.
The host name of the Storage
Server is invalid. Check the host
name or IP address.
The port number of the Storage
Server is invalid. Specify a number
in the range of 1 to 65535.
Specify the host name of the
Storage Server.
This location name cannot be used
because it already exists.
The location name is not specified.
Delete the added zone before
deleting the location.
Select a location.
This zone name cannot be used
because it already exists.
The zone name is not specified.
Delete the added camera server
before deleting the zone.
Adding/Editing/
Deleting the
Storage Server
Adding/Editing a
Location and
Zone
List of Messages