Filter
Top Products
159
5
Viewer Reference
Setting the Viewer
Viewer Settings window - Audio Transmission Settings
The camera which is sending or
receiving audio to a Viewer cannot
interact with other Admin or NC
Viewers. Audio transmission and
reception can be terminated
automatically even if you forget to
disconnect the audio connection.
When using this option, tick The voice transmission will be ended for fixed time
automatically check box, and specify the period within the range from 1 to 60 minutes
(default is 10 minutes). When the specified period of time passes during audio
transmission, it will be terminated automatically.
Viewer Settings window - Configure Focus Settings
You can set the camera to return its
focus mode to the default setting
when the camera orientation is
changed. The focus mode returns
to default if it has been changed to
Manual after any focus operation
using a preset with focus setting
defined or via Camera Control
Panel.
Use this option by ticking the It returns to the default setting on the camera side when
the camera is operated check box.
Automatic termination works even if the servers are
communicating with each other. Switching to another Video
Window resets the time.
T
i
p