Filter
Top Products
123
4
Registering Camera Server and Setting Recording Schedule
Setting Motion Detection Recording
●
Step 5: Set frame rate and pre and post event recording duration
Max. Frame Rate - select a maximum
frame rate for recorded video from the
drop-down menu. Choose from 0.1
frames per second to 30 frames per
second (5 is the default).
Record for before event - enter a number of seconds for the amount of recording
time before the event occurs (up to 30 seconds).
2
1
Record for after event - enter a number of seconds for the amount of recording
time after the event occurs (up to 999 seconds).
3
If Continuous is also set, Record for before event is not
available.
If Record for before event is set to one second or longer, it will
take approximately 10 seconds after event occurrence until its
display.
N
o
t
e
●
Set the Duration
Duration is the length of time necessary for the change to be recognized as motion.
Click and drag the Duration slide bar to any
position between 0.0 and 5.0 seconds. This
establishes the duration of motion allowed
before an event is triggered. It also
establishes the period where there is no
motion in order for the event to be completed.
●
Step 4: Set the event priority status
In the Priority field, select the priority for the
event to be generated for this motion from a
menu of five options, ranging from 1. Highest
to 5. Lowest. Priorities are color-coded in the
Timeline in the Viewing Screen.