Clover Electronics CDR0460 DVR User Manual


 
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6
11
3. WHAT TO DO AT THE TIME OF INSTALLATION
The system should be installed in the following order;
1. Make sure all the required hardware is available.
- CDR0460/ 0860/ 1660, 4CH/ 8CH/ 16CH DVR
- Up to 4/ 8/ 16 cameras
- CCTV monitor or TV set if necessary
- Network cable if connecting to a PC
2. Connect the cameras to the DVR (Refer to chapter 6.2 CAMERA CONNECTION
on page 24.).
4. Confirm if live video is displayed on the monitor before going to the next step.
5. Select the Setup Menu and set current date and time (Refer to chapter 8.3.2.1 TIME & DATE
on page 69.).
6. Perform HDD formatting.
7. Escape from Setup Menu.
8. Set values for required options.
9. Network cable should be connected to the monitor before turning the power on (Refer to chapter 6.7
CONNECTION TO AN ETHERNET NETWORK for the cable specification on page 27.).