Clover Electronics CDR0460 DVR User Manual


 
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6
70
8.3.2.1. TIME & DATE
At the CLOCK Menu,
Double-click TIME & DATE or highlight TIME & DATE
and then press the ENTER button and the TIME &
DATE setup screen will be displayed like the left
picture.
Select the values (year/month/date and
hour:minute:second) by clicking the left button of the
mouse and then click the APPLY button to set.
Or in case of using the remote controller or the front
panel buttons, use the ,
,, buttons to move the
cursor and press the ENTER button to select. Press
the ENTER (
) button on the pop-up window to set
the selected value except for month setting. And move the cursor to the APPLY button and
then press the ENTER button to set up the changed time and date.
Click the X button or press the ESC button to exit from this screen.
8.3.2.2. TIME ADJUST
At the CLOCK Menu,
Double-click TIME ADJUST or highlight TIME ADJUST
and then press the ENTER button and the TIME
ADJUST menu will be displayed like the left picture.
Click the X button or press the ESC button to exit from
this screen.
8.3.2.2.1. INTERNET TIME ADJUST
Select automatic time adjustment through internet time server on or off by clicking the left button
of the mouse on the value. Or in case of using the remote controller or the front panel buttons,
highlight INTERNET TIME ADJUST and press the ENTER button and then move the cursor to
the desired value using the , buttons and press
the ENTER button. The default is OFF.
NOTE:
If the INTERNET TIME ADJUST is “ON”, the time of DVR will be adjusted to the time offered by the
internet server.
10 IP addresses of the time server are set in the DVR so the DVR will be adjusted the time with one
of 10 IP addresses to have been set in advance.
8.3.2.2.2. SELECT TIME ZONE
Select the time zone for the local time by clicking the left button of the mouse on the value. Or in
case of using the remote controller or the front panel buttons, highlight SELECT TIME ZONE and
press the ENTER button and then move the cursor to the desired value using the , buttons
and press
the ENTER button. For the list of the time zone for your local area, refer to the
below TIME ZONE LISTING.