Clover Electronics CDR0460 DVR User Manual


 
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6
73
Copy button
Live Audio selection
Main Menu button
PTZ control button
NOTE:
In case of the PASSWORD CHECK is ON, only ADMIN can set the NEW PASSWORD.
8.3.4.2. SET PASSWORD
At the PASSWORD menu,
Double-click SET PASSWORD or highlight SET
PASSWORD and then press the ENTER button and
the PASSWORD INPUT screen will be displayed like
the left picture.
Click the X button or press the ESC button to exit from
this screen.
To modify the password, click the numeric buttons to
enter the current password. Or in case of using the
remote controller or the front panel buttons, move the
cursor using the
, buttons and press the ENTER
button to input.
The asterisks will advance automatically as the numbers are entered.
The default password is 11111111.
If the entered password is correct, the new password
input screen will be displayed like the left picture. (If
the password is not eight digits, you have to click the
ENTER (
) button to enter the new password
input screen.)
Enter eight numbers for the new password and then
re-enter the same password under CONFIRM section
same as the current password input method.
When finish the password setting correctly, you can
see the message, “NEW PASSWORD NOW ACTIVE”
like the left picture.
NOTE:
User can set a PASSWORD up to eight digits.