Clover Electronics CDR0460 DVR User Manual


 
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6
32
Clicking the numeric buttons on the PIP control
bar or pressing the numeric buttons of the
remote controller will change the PIP window to
change the channel to the desired channel.
Click the directional buttons on the PIP control
bar or press the directional buttons of the
remote controller or the front panel to place the
PIP window to the desired location on the
screen.
Click this button or press the ENTER button of the remote controller or the front panel and
the PIP window will be zoomed up.
Click the
button or press the ESC button of the remote controller to exit out of the PIP
mode.
7.5.7. SPOT MONITOR
The spot monitor allows viewing of individual cameras in the live mode while the main monitor
may be busy with different tasks, such as playback. This unit offers a single channel spot output.
For detail explanation of the spot monitor setup, refer to chapter 8.1.4 SPOT
on page 59.
During any view modes, press the SPOT button of
the remote controller for Spot monitor mode.
Press any channel numbers of the remote
controller or the CH SELECT button of the front
panel to display the channel in full screen mode
on the spot monitor.