Filter
Top Products
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6
42
To change the month, click the MONTH button and
then click the desired month or highlight the MONTH
button using ▲,▼,
◀, ▶ buttons and press the ENTER
button and then highlight the desired month using
▲,▼
,◀, ▶ buttons and then press the ENTER button
of the remote controller or the front panel.
To change the year, click the YEAR button and then
click the desired numeric buttons and then click the
ENTER (
) button on the year input box. Or in case
of using the remote controller or the buttons of front
panel, highlight the YEAR button using ▲,▼
,◀, ▶
buttons and press the ENTER button and then move
the cursor to the desired numeric button using ▲,▼,◀,
▶
buttons and then press the ENTER button to select
and then move the cursor to the
ENTER (
) button on the year input box and then press the ENTER button.
When a date is selected, the DVR will then search
again for the recorded data in a 24-hour period for the
date.
The hour blocks that contain data will be displayed in
red. Click the desired hour block and then click the
PLAY button. In case of using the remote controller or
the buttons of front panel, move the highlight to the
desired hour block using
◀, ▶ buttons and then move
the cursor to PLAY button and then press the ENTER
button to start the playback.
Refer to chapter 7.7.1 BASIC PLAYBACK
on page 36
to maneuver through the playback as needed.