Clover Electronics CDR0460 DVR User Manual


 
MODEL: CDR1660 / CDR0860 / CDR0460 H.264 STAND-ALONE DVR USER MANUAL V 2.6
72
8.3.3. BUZZER
You can hear the beep sound when event occurs or key operation if the BUZZER setup is ON.
At the SYSTEM menu,
Click the left button of the mouse on the value. Or in
case of using the remote controller or the front panel
buttons, highlight BUZZER and press the ENTER
button and then move the cursor to the desired value
using the , buttons and press
the ENTER button.
The Default value is ON.
ON: The beep sounds when you press any buttons on the
front panel of DVR or remote controller or click the mouse
and any event happens.
OFF: The beep does not sound.
NOTE:
Whenever there is Video Loss, Alarm, Motion or HDD error, this unit will display the specific
message continuously for 30 seconds with an alarming sound having an interval of 5 Seconds each
8.3.4. PASSWORD
At the SYSTEM menu,
Double-click PASSWORD or highlight PASSWORD
and then press the ENTER button and the
PASSWORD menu will be displayed like the left
picture.
Click the X button or press the ESC button to exit from
this screen.
8.3.4.1. PASSWORD
At the PASSWORD menu,
Select the PASSWORD option on or off by clicking the
left button of the mouse on the value. Or in case of
using the remote controller or the front panel buttons,
highlight PASSWORD and press the ENTER button
and then move the cursor to the desired value using
the , buttons and press
the ENTER button. The
Default value is OFF.
When enabled, it will prompt for password on the
following functions.
REC button
Search button
Play button
Direction button