Filter
Top Products
Getting Started Network
function
Troubleshooting Specifications
PC
Application
NEXT
VOL+ –
7
1
9
2
BACK
RC SETUP
6
8
DEVICE
LCD
LCD
3
Adjusting the contrast
Set this if the characters on the screen are hard to see.
Initial setting: Level 5
1
Press RC SETUP for 3 seconds.
The “PROGRAM DEVICE” menu is displayed.
2
Press NEXT twice, then press [USER
PREF].
3
Press [CONTRAST].
4
Press NEXT.
5
Press [–CONTRAST+] to set the contrast.
• LCD button on right side .......................................+
•
LCD button on left side .........................................–
b The contrast can be set within the range of “Level 0
(MIN)” to “Level 12 (MAX)”.
6
Press [SAVE].
7
Press NEXT.
Setting the backlight on time
Use this procedure to set the time until the backlight
turns off.
Initial setting: 5 seconds
1
Press RC SETUP for 3 seconds.
The “PROGRAM DEVICE” menu is displayed.
2
Press NEXT twice, then press [USER
PREF].
3
Press [LIGHT T/O].
4
Press NEXT.
5
Press [–LIGHT T/O+] to set the time until
the light turns off.
• LCD button on right side .......................................+
•
LCD button on left side .........................................–
b The time can be set between Light Off and 30 (MAX).
6
Press [SAVE].
7
Press NEXT.
Completing the setting
Press DEVICE until the “DEVICE SELECT”
screen appears.
Operation
LCD buttonLCD button
About the button names in these explanations
[ ] : LCD buttons for selection items
Button name only:
Indicates a button on the remote control unit